Which Caddock Products will be supported by Caddock for use in Military Applications?

Background of Caddock's experience supporting Military Applications

For over 40 years, Caddock Electronics has developed and supported specifically selected High Performance Commercial/Industrial Resistor Products for use in Military Applications. Caddock has had a high degree of success supporting the most demanding Military Applications with these selected Caddock Products. Based on our long experience with Military Applications, and the fact that our reputation with our customers in Military Applications is extremely important to us, we have a clearly defined approach regarding the range of Caddock Commercial/Industrial Resistor Products that will be made available to support the requirements of our Military customers. To assist the designer of Military products in selecting and specifying the correct Caddock Product, we have broken down the full Caddock product line into three categories relative to Caddock's level of support for their use in Military Applications. For Military Applications, Caddock will only provide our High Performance Resistor products according to the guidance provided in the Support Category descriptions below.

Caddock Products Support Categories define the level of support provided for use in Military Applications.

Overview of Product Support Categories for Military Applications
Support Category 1

The following Caddock High Performance Resistor Products have been developed by Caddock for use in commercial/Industrial Applications. These specifically selected products are also supported by Caddock for use in Military Applications. These products may be ordered by their Catalog P/Ns for use in Military Applications

Important Note: The Industrial User or the Military User can specify additional part requirements that are offered by Caddock. Any requirements, that are in addition to the product that is delivered according to the Catalog P/N, must be defined in a Specification Control Drawing (SCD)

Type MG
Type TG
Type MS
*Type ML
*Type MM
Type MV
Model TK134
Model MPM20


*For new applications, Caddock recommends the Type MS resistors be evaluated in place of the Type ML and Type MM Resistors.
Support Category 2

The Following specific Caddock Commercial/Industrial Resistor Products, have a pure matte tin terminal finish.

Type MK
Model MP2060
Model MP725
Model MP820
Model MP821
Model MP825
Model MP850
Model MP915
Model MP916
Model MP925
Model MP930
Model MP9100
Type TK (except Model TK134)

In order for Caddock to supply these Commercial/Industrial products for use in a Military Application, the Military User must provide a Specification Control Drawing (SCD), that includes at a minimum the information provided in the SCD Templates. A Caddock control number will be provided for the part defined in the Customer SCD. The link below provides access to Caddock's Templates to assist with the development of a mutually acceptable Customer SCD. Some Templates include the necessary Limitation of Use Statement.
Support Category 3

The following Caddock Commercial/Industrial Resistor Products are not supported by Caddock in any way for use in Military Applications.

Do not use the products in Military Applications.

Type CC
Type CD
Type CHR
Type HVD
Type MX
Type SR
Type TF
Type TN
Model T912
Model T914
Type USF
Type USG
Type USVD
Type 1776
Type 1787
Type 1789
Type T1794
Support Category 1 information:

The following Caddock resistor products have been developed by Caddock for use in High Performance Commercial/Industrial Applications. These specifically selected products are also supported by Caddock for use in Military Applications. These products may be ordered by their Catalog P/Ns for use in Military Applications.

Important Note: The industrial User or the Military User can specify additional part requirements that are offered by Caddock. Any requirements, that are in addition to the product that is delivered according to the Catalog P/N, must be defined in a Customer Specification Control Drawing (SCD).

Type MG
Type TG
Type MS
*Type ML
*Type MM
Type MV
Model TK134
Model MPM20
* For new applications, Caddock recommends the Type MS resistors be evaluated in place of the Type ML and Type MM Resistors
Description of Resistors in Support Category 1

Precision High Voltage Resistors
Precision, Low TC, High Voltage Resistors
Precision Film Resistors, Non-Inductive
Precision, Low TC, Film Resistors, Non-Inductive
Power Film Resistors, Non-Inductive
Power Film Resistors, Low Resistance, Non-Inductive
Power Film Resistors, Head Sink Mount, Non-Inductive
Package Type

Axial Lead, Thru-Hole
Axial Lead, Thru-Hole
Axial Lead, Thru-Hole
Radial Lead, Thru-Hole
Axial Lead, Thru-Hole
Axial Lead, Thru-Hole
TO-220 Style, Thru-Hole
Family or Model

Type MG
Type TG
Type MS
Model TK134
Type MS
Type MV
Model MPM20
Examples of Additional Part Requirements that can be defined through a Customer Specification Control Drawing (SCD):

When the customer has additional part requirements, these same "Support Category 1" products will be provided only when there is a Customer SCD that defines the additional part requirements. The following are some of the additional requirements that are offered by Caddock depending on the demands of the User's high performance design or of the User's program:
J-STD-002 Solderability Requirements
Hot Solder Dip (63Sn/37Pb)
Single Lot Traceability
Full Material Traceability
Special Certification
Special Packaging
Customer Part Number Marking
Date Code Marking or Serialization
Special Quality Conformance Inspection Requirements
Any Requirements for Data to be Delivered
Special Unit Package Labeling
Special Shipping Container or Shipping Label Requirements
Purchase Order Notes or Quality Notes that define part requirements that affect the manufacturing, process, packaging, performance, or traceability of the Caddock product will only be accepted by Caddock when these additional requirements are specified in the Customer Specification Control Drawing (SCD).

Assistance in developing the Customer Specification Control Drawing (SCD):
Caddock Application Engineering will work together with the Industrial Customer Engineering or the Military Customer Engineering to generate a mutually agreeable SCD. In this way, all of the User requirements that impact the procurement of the product, the manufacturing of the product, the quality conformance inspection requirements, the documentation of the product, and the shipment of the product will be fully and agreeably defined.

The SCD for "Support Category1" products, when necessary, must specify:

a. Customer P/N
b. Caddock P/N (To be assigned by Caddock Application Engineering)
c. The definition of any special requirements

To assist the Military User, Please click on the links below to download the Product Data Sheet for Military Use or an SCD Template.

Caddock Sales Contact for all Military Applications;
Caddock Electronics, Inc. - CSR Sales
Mr. Clay Quinn
17271 N. Umpqua Hwy., Roseburg, OR 97470 USA
Tel: 541-496-0700; Fax: 541-496-0408; email: clay.quinn@caddock.com
Support Category 2 Information:

The following specific Caddock Commercial/Industrial Resistor Products have a pure matte tin terminal finish. In order for Caddock to supply these products for use in a Military Application, the Military user must provide a Specification Control Drawing (SCD), that includes at a minimum the information provided in the SCD Templates. A Caddock control number will be provided for the part defined in the Customer SCD. See below for the link to Caddock's Templates to assist with the development of a mutually acceptable Customer SCD.

Type MK
Model MP2060
Model MP725
Model MP820
Model MP821
Model MP825
Model MP850
Model MP915
Model MP916
Model MP925
Model MP930
Model MP9100
Type TK (except Model TK134)

Some Templates include the Limitation of Use Statement that is necessary for using Caddock's Commercial/Industrial Products for Military Applications:

Caddock does not recommend the "Support Category 2" commercial/Industrial products that have Pure Matte Tin (100% Sn) finishes for Military Applications. The level of support that Caddock provides for the use of "Support Category 2" products in Military Application is as defined in the mutually agreeable SCD. Some SCD Templates (see below) include the necessary Limitation of Use Statement that is appropriate for a particular product.

An SCD for all "Support Category 2" Products is required and must specify:

a. Customer P/N
b. Caddock P/N (To be assigned by Caddock Application Engineering to control Processing to the SCD)
c. Lead Finish Definition per the appropriate SCD template
d. A Recommended Limitation of Use Statement must be included in the SCD, when it is shown as a requirement in the SCD Template for a particular product.

SCD Templates for the Caddock Products listed in "Support Category 2"

Caddock has prepared Military Use SCD Templates (in Microsoft Word) for the "Support Category 2" commercial/industrial models to assist in defining the important information to be incorporated into the customer SCD.

Please click on the links below to download a Data Sheet for Military Use, or and SCD Template

Caddock Sales Contact for all Military Applications;
Caddock Electronics, Inc. - CSR Sales
Mr. Clay Quinn
17271 N. Umpqua Hwy., Roseburg, OR 97470 USA
Tel: 541-496-0700; Fax: 541-496-0408; email: clay.quinn@caddock.com